SilverPro©  Colloidal Silver Water Generator Model GM550

Colloidal Silver Water Generator  SilverPro© 

Model GM550  August  9, 2014

Features and Funct ions
 

• Alphanumeric Status Display for indicating colloidal silver status or setup parameters.

• Pre process water over mineralization or contarmination guard detector.
   continuously monitors the water.

• Variable PPM (Parts Per Million) settings shuts itself off automatically when it reaches 
  the desired strength makes SilverPro© a genuine 'set and forget' system.
• Powered by  AC/DC wall adapter.
• Digitally Adjustable constant current output from ~0.1 mA to 15mA. (0.1mA steps).
• Alternating polarity voltage swap with djustable frequency eliminates build-up on the electrodes and the need for stirring.
• DC-DC converter boosts the input 6 -12 Volt to the 48 Volts DC used for fast ionic Colloidal Silver DC generation.

• 3 year limited warranty.
   

scroll the mouse over the picture to swap panels

The SilverPro© Colloidal Silver Generator makes the highest quality Ionic Colloidal Silver using 99.99% pure silver electrodes. It has variable PPM (Parts Per Million) settings and shuts itself off automatically when it reaches the desired strength. 

Adjustable frequency voltage polarity swap dispersing the atoms as they are being released, very little agglomeration occurs and the result is crystal clear and colorless ionic/colloidal silver of the smallest particle size. 

Color is generally attributed to particle agglomeration unless it is from using mineralized water or a contaminated production vessel.

Silver Wire Life: Can make 50-75 gallons of 5-20 PPM ionic-colloidal silver per set of Silver Wires, when made as directed.
 

SilverPro© uses a conductivity referencing circuit that continuously monitors the water electronically , It has variable PPM (Parts Per Million) settings and shuts itself off automatically when it reaches the desired strength.

The resulting Silver Colloid and Ionic Solution (Silver Hydrosol) is very pure, stable and clear. It is NOT light sensitive.

Ionic-Colloid Silver Production: 3-20 PPM (parts per million)  6 hours for 1oooml distilled water.
Ionic-Colloid Silver Particle Size: Mostly ionic, with colloidal particles in the range of 0.005 - 0.015 microns when made as directed.
The SilverPro© is a state-of-the-art product powered by 6-12 volt DC adapter.

Specifications: 

Size : H23 x L91 x W57

Weight : 0.15 Kg
Input Voltage: 6 - 12 Volts AC/DC @ 500mA Wall Transformer/Adapter. 
Max output Voltage at SilverPro© Probes: 48 Volts DC.
Output Current (Adjustable Constant-Current): 0.1mA - 15mA .

The Fine Silver Wires are 14 AWG (1.63 mm or 0.064" dia.) x 8" long (1.5 mm diameter x 20.3 cm long) and are constructed of only Pure Fine (.9999 or 99.99% pure) Silver Wire.
SilverPro© ships with an International Wall Adaptor intended for any voltage from 110VAC 60 Hz (North America) to 220/240 Volt AC 50 Hz Mains .

Each SilverPro© comes complete with:
(1) x control unit 
(2) x .9999 (4 Nine Grade) Pure Fine Silver Wire Electrodes
(1) x Soft carrying case
Operating manual.
AC-DC Wall Adaptor.
SilverPro© 3 Year Parts and Labor Warranty on CPU

Copyright © SilverPro . All rights reserved
This Site has been visited